projects:carussell
Differences
This shows you the differences between two versions of the page.
| projects:carussell [2019/01/17 20:27] – Setup && Teardown manual added riot | projects:carussell [2019/01/17 20:31] (current) – MIDI riot | ||
|---|---|---|---|
| Line 37: | Line 37: | ||
| * Unplug power plug | * Unplug power plug | ||
| * Replace movable walls | * Replace movable walls | ||
| + | |||
| + | ====== MIDI Clock & Input ======= | ||
| + | |||
| + | If you need a midi clock on the caroussell, there is a sequencer/ | ||
| + | To make it work and send a MIDI clock signal to the caroussell you will need to do the following: | ||
| + | |||
| + | * Plugin power plug from sequencer rack | ||
| + | * Power on Manikin Schrittmacher by pressing the top left button below the LCD panel (Power) | ||
| + | * Hit play for a simple clock or go wild with the device. Please do not modify stored presets without asking first | ||
| + | |||
| + | If you want to supply your own clock/MIDI signal: | ||
| + | * disconnect the Manikin Schrittmacher from the MIDI merger (or just stop it) | ||
| + | * connect your MIDI source to the MIDI merger | ||
projects/carussell.1547756831.txt.gz · Last modified: 2019/01/17 20:27 by riot
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
