soundlab:guides:how2pa
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| soundlab:guides:how2pa [2026/04/07 09:33] – jan | soundlab:guides:how2pa [2026/04/07 09:35] (current) – jan | ||
|---|---|---|---|
| Line 2: | Line 2: | ||
| This guide describes, how to turn on and off the audio PA in the recording room in easy steps | This guide describes, how to turn on and off the audio PA in the recording room in easy steps | ||
| - | *. turn on the power distribution plug in the direction room. the mixer will start | + | * turn on the power distribution plug in the direction room. the mixer will start |
| - | *. then turn on the power distribution plug in the recording room. the computer will start and shows the mixer app. | + | * then turn on the power distribution plug in the recording room. the computer will start and shows the mixer app. |
| - | *. turn on the the "the box" speakers on the floor, on the back side the little swicht near the power plug. | + | * turn on the the "the box" speakers on the floor, on the back side the little swicht near the power plug. |
| - | *. if the previous steps are done, then you can turn on your instrument which uses the speakers. | + | * if the previous steps are done, then you can turn on your instrument which uses the speakers. |
| - | *. bring up the audio channel in the mixer app on the computer. | + | * bring up the audio channel in the mixer app on the computer. |
| - look where your instrument is connected to th stage box and look at the mixer which channel is it. | - look where your instrument is connected to th stage box and look at the mixer which channel is it. | ||
| - the stage boxes are connected by the following order: 1. stagebox(at the drums) IN ch 1-8, OUT ch 1-4; 2. stage box(in the shelv) IN 9-16(labeled as 1-8 on the box) | - the stage boxes are connected by the following order: 1. stagebox(at the drums) IN ch 1-8, OUT ch 1-4; 2. stage box(in the shelv) IN 9-16(labeled as 1-8 on the box) | ||
| - in the mixer app you have to take a look to the following options: | - in the mixer app you have to take a look to the following options: | ||
| - | - 1. in the main section, the channel must be unmuted | + | - in the main section, the channel must be unmuted |
| - | - 2. in the active speaker section, the channel has to be swiched on(the best is, to turn the fade down if you switched the channel on) | + | - in the active speaker section, the channel has to be swiched on(the best is, to turn the fade down if you switched the channel on) |
soundlab/guides/how2pa.txt · Last modified: 2026/04/07 09:35 by jan
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
