This guide describes, how to turn on and off the audio PA in the recording room in easy steps

• turn on the power distribution plug in the direction room. the mixer will start
• then turn on the power distribution plug in the recording room. the computer will start and shows the mixer app.
• turn on the the “the box” speakers on the floor, on the back side the little swicht near the power plug.
• if the previous steps are done, then you can turn on your instrument which uses the speakers.
• bring up the audio channel in the mixer app on the computer.
  1. look where your instrument is connected to th stage box and look at the mixer which channel is it.
  2. the stage boxes are connected by the following order: 1. stagebox(at the drums) IN ch 1-8, OUT ch 1-4; 2. stage box(in the shelv) IN 9-16(labeled as 1-8 on the box)
  3. in the mixer app you have to take a look to the following options:
     1. in the main section, the channel must be unmuted
     2. in the active speaker section, the channel has to be swiched on(the best is, to turn the fade down if you switched the channel on)